Selecting the Right Odysseus Bar





SELECTING THE RIGHT ODYSSEUS BAR™
FOR YOUR RACK OR RIG


Step 1

Be sure your Rack/Rig has 2” x 2, 2” x 3” or 3” x 3” or similar sized steel supports for mounting pull-up bars.

Step 2

Measure the distance between the mounting supports.

Our standard length bars are 42”, 42.5”, 43” and 44”.

Step 3

Measure the distance between mounting holes on the mounting supports.

If there are two mounting holes that are 6” apart you can use the 8” Standard Bracket or the 12” Universal Bracket.

If the two mounting holes are greater than 6” apart and less than 10” apart you will need to use the 12” Universal Bracket.

The 12” Universal Bracket mounts in the same manner as the 8” Standard Bracket.

Instead of a hole for the lower mounting bolt, the Universal Bracket has a 4” slot allowing you flexibility in mounting your ODYSSEUS BAR


EXAMPLES

Rogue® Westside Rack - you would order a 43” ODYSSEUS BAR with Standard Brackets.

Rogue® Infinity Rig – you would order a 43” ODYSSEUS BAR with Standard or Universal Brackets.

The Fitness Armory ETE Wall Mounted Fortress Pull Up Rig – you would order a 42” ODYSSEUS BAR with Universal Brackets.

Rep Fitness Pull-up Rig – you would order a 44” ODYSSEUS BAR with Universal Brackets.